Thursday, March 2, 2017

DIY: MISSPAP Kandy Silver Lace Hoop Choker Inspired

 photo IMG_4613_zpsbl5uknkh.png

Materials
*Round Nose Pliers
*Flat Nose Pliers
*Black Long Suede String
*1 Large Silver Round Wire Ring (from Hobby Lobby which comes in a pack)
*1 Large Ribbon End Clamps (from Joann Fabrics)
*2 Small Ribbon End Clamps (from Joann Fabrics)
*1 Small Round Circle Brass Ring (from Michael's)
*2 Silver Headpins (from Joann Fabrics)
*2 Small Silver Stars

   photo IMG_4616_zpsfxxjgzzu.pngStep 1: Fold the string in half so that both ends are equal, then placed the large ribbon end clamps in the middle of the string. Use the plat nose pliers to press the clamps tightly onto the string.

   photo IMG_4617_zpsowi0rpcu.pngStep 2: Take the small round circle brass ring and hook it onto the large round wire ring. Next, hook the small round circle brass ring onto the ribbon end clamps. Use the round nose pliers and flat nose pliers to secured it closed tightly.

   photo IMG_4618_zpsx5wjhtff.pngIt should look like this.

   photo IMG_4619_zpswykxq89u.pngStep 3: Place the two small ribbon end clamps onto the end of the string. Use the flat nose pliers to press the clamps tightly onto the string.

   photo IMG_4621_zpssre0pjl3.pngStep 4: Take a headpin and poke it through the star. Use the wire cutter and cut an inch and 1/2 off of the headpin. (Measurements can be different depending on how long or short your headpin is)

   photo IMG_4623_zpssd7ec1hm.pngUse the round nose pliers to create a loop at the end.

   photo IMG_4627_zpsfk7kxcye.pngStep 5: Hook the loop onto the small ribbon end clamps and used the flat nose pliers to secured it closed tightly.

   photo IMG_4628_zpsi2sas6ry.pngIt should look like this when you're done.

   photo IMG_4608_zpsvgh4smoz.pngFINISHED LOOK!!

No comments:

Post a Comment